Clay is a smooth, pliable, non-hardening product that is good for adhesion for damming and making reservoirs when using fluid Moglice® products.
Clean sheets give you a contamination free surface for each new mix!
3 easy steps to follow:
1. Mix on the sheet
2. Apply to surface
3. Tear off sheet for the next mix.
Our Cleaner/Degreaser is an aerosol spray. Used to remove oils and grease from many different surfaces. Mostly used on metal surfaces and Turcite® B, as shown in this video. We use this to make sure there is no contamination stopping any products from adhering to the surface. This is very effective when used properly!
Hi-Spot Blue – Identify high spots, interference points and improper fit on bearings, gears, and valves. Apply this paste, also known as “engineer’s blue”, to part and assemble them into working positions. Any improper fit will show up as a blue streak.
Honey Wax is a unique, high gloss paste wax for use by composite fabricators as a mold release agent. It is compounded with the purest grade carnauba wax, plus special binders and spreading agents.
Injection Syringe/Cartridge – Available in 3 sizes, 100gr., 250gr., and 500gr. Used for injection of fluid Moglice.
Lapping Compound – Use when nuts have been molded with Moglice are too tight. This breaks down and does not continue to cut or wear.
Jiffy Mixers – Specialty designed mixers to reduce air inclusion when mechanically mixing polymers.
Alignment Materials “Moglice Shims” – One square inch shim available in the following sizes: .029″, .040″, .055″, .072″, .092″, .120″, .143″, .032″, .045″, .063″, .081″, .108″, .127″, .185″.
Spatula – Spatula for mixing products.
Spray Bottle – Chemically resistant 24 oz spray bottle.
Teflon Tape
4 Sizes available
3/8” x .020 x 5 yds
¼” x .020 x 5 yds
3/8” x .030 x 5 yds
½: x 0.50 x 5 yds